April 09, 2009

0 Comments




 

Top Bar Hives, Warre Hives and Cedar Bee Hives

Our hives are built in Portland, Oregon from Western Red Cedar. In addition to beekeeping supplies, we also provide bee swarm removal, beekeeping classes, and hive consultations.

We've used the same cedar top bar hives and Warre hives we sell in our own apiary since 2008. Based on our testing and customer feedback, we've continued to refine the hives we build. We're proud to offer what we believe are the most innovative, well-made hives in the world.

When you buy hives and other beekeeping equipment from us, know that we're always available by phone, e-mail, or in person at our retail store to assist you. We keep bees ourselves and understand how to use each type of hive we sell. We want you to succeed as a beekeeper!

 


 


 

First 10 Bee Packages Installed

What a week! After more than 6 months of planning and building, the first 10 packages in the 20 hive apiary expansion have been installed. 5 packages of Italians and 5 packages of Carniolans arrived at Ruhl Bee Supply on Monday, after a trek from Northern California's Oliveraz Bee Company. It was an unusually warm day -- almost 80 degrees in April!

My wife, a photographer from the Oregonian and I met at Ruhl, waited in line for 20 minutes to pay and then entered the holy of holies: The small warehouse containing over 10,000,000 honey bees -- 1000 packages. Our photographer was obviously taken aback by the sight and intense sound, but slowly began to adjust to the idea.

We got our packages, carted them to the truck and proceeded to strap them down for the 3 mile trip to our Oak Grove home where the first three packages were to be installed.

Packages in truck bed:

From Hive Install 4-6-09

Upon arrival we quickly unloaded them, placed them in a shady spot, squirted each of them with some syrup and then I began hiving them, one at a time.

Packages awaiting new homes:

From Hive Install 4-6-09

Our hives:

From Hive Install 4-6-09

First, I gingerly procured the queen from one of the Carniolan packages and quickly replaced the can so as not to release too many unhappy bees. I removed the cork, covered the hole with my thumb and inserted a small marshmellow where the cork had resided.  After that I removed all but the bottom box from the Warre hive, placed the queen cage in the back corner and removed a few bars above her. I grabbed the package, slammed it down to get the bees to the bottom, removed the can, upturned it and began pouring them in on top of the cage. I set the package down for a moment as I got stung in the ear. After swearing, I replaced the bars and added the top box and poured the rest of the bees into that one. I leaned the package against the entrance, added the feeder box and top and walked away from the mass of frantic bees.

Dumping bees time lapse:

From Hive Install 4-6-09
From Hive Install 4-6-09
From Hive Install 4-6-09
From Hive Install 4-6-09
From Hive Install 4-6-09

Replacing bars:

From Hive Install 4-6-09

Almost entirely in their new home:

From Hive Install 4-6-09

I then proceeded to perform the same process on the 9 top bar hives -- 2 at our home, and the remaining 7 split between two neighbors yards.

Mentoring soon-to-be-beekeeper:

From Hive Install 4-6-09

It was an exhausting day, but I'm glad we got it done. And I'm glad the Oregonian was there to document the process. The article should be in MIX Magazine in May or June.

This week I continue preparing the 10 Warre hives that will receive the next shipment of bees. It has been determined that 3 hives will be placed at Sokol Blosser Winery, 4 at Lachini Vineyards and 3 at Cameron Winery. I look forward to it!

More photos and video to come.


Matt Reed
Matt Reed

Author



Leave a comment

Comments will be approved before showing up.